Multiplex FunJET Kit 31.29" M214213

This is a Radio Controlled, Electric Powered, Elapor Particle Foam Construction, Multiplex FunJet Kit. This model features a rear mounted motor design.Need Speed? Multiplex introduces the easy way to fly fast with the FunJET. Blazing across the sky has never been more fun! Gone are the days of the hard to launch, hard to land, fragile jets. The FunJET goes from launch to super ballistic in a flash yet is docile at slow speeds making landings gentle. Multiplex ELAPOR Foam construction gives the FunJET unparalleled durability and strength.

Features

• Multiplex FunJET Kit 31.29" M214213

• Construction, Elapor foam, white in color

• Wings: Elapor foam construction, white in color

• Radio compartment: Elapor foam construction, white in color

• Canopy: Elapor foam construction, white in color

• Landing gear: None, model should be hand launched and belly landed

• Hardware: Pushrods, hook and loop material, screw lock connectors, and other miscellaneous hardware inlcuded

• Motor Mount: Black plastic construction with adjustable motor thrust lines

• Elevon control

• Fiberglass wing spar: 22.5" (571mm) long by .25" (6.35mm) diameter

Specifications

• Wingspan: 31.29" (795mm)

• Wing Area: 232 sq in (15 sq dm)

• Weight: 21oz (620g)

• Length: 29.52" (750mm)

• Airfoil: Semi-symmetrical, mid wing at the fuselage sides.

• Control Throws-

• Elevons: Up: .47" (12mm) Down: .39" (10mm)

Contents

• Foam fuselage; wing panels; turtle deck; canopy; and fins, two wire pushrods (1mm (.039") diameter), fiberglass wing spar, plastic servo fairings, motor mount, hardware kit, decals and illustrated assembly instructions.

Requirements

• Brushless Motor Power Pack - MPUG3213 (contains Motor, Speed Control Prop and Hardware)

• Battery - 3 cell 2100-3200mah LiPo pack - GPMP0841 (will require a mating connector for the speed control - WSDM1302

• Charger - MPUP9531 or GPMM3153

• Radio: Minimum 3 channel with elevon mixing - FUTJ51**

• Servos: 2 nano size servos for elevon control - FUTM0025

• Servo Extension 12": 2 required - HCAM2100

Comments

• This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer