Hobbico Twinstar .25 Twin ARF HCAA2076

This is the radio controlled, glow powered, Almost-Ready-to-Fly, Hobbico Twinstar Scale Trainer Airplane. For beginner to intermediate modeler/fliers.

Features

• Hobbico Twinstar .25 Twin ARF HCAA2076

• Construction: Balsa and plywood

• Wings: Two piece balsa and plywood joins with plywood joiners, attaches with nylon bolts, left and right engine nacelles must be attached

• Engine Nacelles: Constructed of plywood, covered and trimmed

• Covering: Factory applied, iron-on, color scheme is White with Red,

• Blue and Black stripes on wing, fuselage and tail sections, Black sections simulate cabin windows

• Radio Compartment: Plywood reinforced, accessible from bottom of fuselage where wing attaches

• Cowling: Pre-painted fiberglass, White with stripes applied

• Landing Gear: Fixed tricycle style with 0.16" (4mm) diameter wires

• Wheels: Foam, three 2-3/4" (70mm) diameter

• Aileron Control: Single servo

• Spinners: Two 2" (51mm) constructed of plastic, Red in color

• Engine Mounts: Two nylon, adjustable

• Fuel Tanks: Two, approximate 4oz (120cc) capacity

• Building Time: Ready To Fly in several hours

• Hardware: Full set included

• Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at purchase date. This warranty does not cover any component parts damaged by use or modification.

 Specifications

• Wingspan: 56" (1420mm)

• Wing Area: 560 sq in (36.1 sq dm)

• Weight: 5 - 5.5lb (2270g - 2490g)

• Wing Loading: 21-23 oz/sq ft (64-70g/sq dm)

• Length: 50" (1270mm)

• Airfoil: Semi-symmetrical, low-wing placement

• Center of Gravity: 3-1/4" (83mm) Back from the wing's leading edge

• Control Throws- High Rate Low Rate

• Elevator: Up & Down 3/8" (9.5mm) 1/4" (6mm)

• Rudder: Right to Left 1" (25mm) 7/8" (22.5mm)

• Ailerons: Up & Down 3/8" (9.5mm) 1/4" (6mm)

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent 0.16" (4mm) tricycle landing gear, three 2-3/4" (70mm) wheels, two engine mounts, two fuel tanks, two 2" (51mm) spinners wood servo trays and wing joiners, hardware package, engine nacelles, photo-illustrated instructions.

Requirements

• Engines: Two .20 - .40 cu in (3.3 - 6.5cc) 2-stroke OR two .26 -.30 cu in (4.2 - 4.9 cc) 4-stroke

• Muffler: Sports-Style supplied with engine (Engines mount in an upright position)

• Radio: 4-Channel

• Servos: 5-Standard (1-Aileron, 1-Elevator, 2-Throttle, 1-Rudder)

• Y-Harness: One, for throttle servos

• Misc. Items: Glow plug, 1/2" foam rubber padding, medium fuel tubing, fuel, fuel filters, propellers, building and field equipment.