Hobbico FlyZone Cessna 182 EP RTF w/2.4GHz Radio

Hobbico FlyZone Cessna 182 EP RTF w/2.4GHz Radio HCAA2505

This is the electric powered, radio controlled, ready-to-fly, FlyZone Cessna 182 Skylane Airplane with the Tactic 2.4GHz Radio

Features

Hobbico FlyZone Cessna 182 EP RTF w/2.4GHz Radio HCAA2505
Construction: Foam
Wings: One-piece reinforced
Radio: Tactic TTX440 4-channel 2.4GHz
Electronic Speed Control:
Motor: 380 size
Landing Gear: Prebent .059" (1.5mm) thick aluminum with prebent wire nosegear
Wheels: Three 1" (25mm) diameter foam
Propeller: Two 7x3, one installed and one spare
Spinner: 1" (26mm) diameter, Black in color
Battery: ElectriFly 7N-J 7-cell 8.4V 1100mAh NiMH (GPMP7700) with Red 2-pin connector
Charger: 12V DC Peak (GPMM7700)
Cowl: ABS plastic
Wheel Pants: ABS plastic
Warranty: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.

Specifications

Wingspan: 35" (890mm)
Length: 27.5" (700mm)
Center of Gravity (CG): Prebalanced at factory but should be confirmed using the following procedure;
Place marks on bottom of wing between 1-7/16" (36mm) and 1¾" (44mm) back from the front of the wing next to the fuselage.
Lift airplane with fingertips, it should balance between the marks.
If it doesn't balance within this area, weight must be added to nose or tail.
Control Throws-
Ailerons, Up and Down: 3/16" (5mm)
Elevator, Up and Down: 5/16" (8mm)
Rudder, Right and Left: 3/8" (10mm)

Contents

FlyZone Cessna 182 Skylane Airplane with 380 size motor, two 7x3 props, spinner, 4-ch 2.4GHz radio w/3 micro servos, -ch receiver, ElectriFly battery and charger, Electronic Speed Control, phillips head screwdriver and illustrated instruction manual

Requirements

Comments

Click To Enlarge