Great Planes Super Sportster EP Brushless ARF GPMA1161

This is the radio controlled, brushless electric powered, almost ready-to-fly ElectriFly Super Sportster EP Sport Airplane. For Intermediate Modeler/Fliers who have safely flown and landed a high wing trainer.

Features

• Great Planes Super Sportster EP Brushless ARF GPMA1161

• Construction: Pre-built and pre-covered all wood construction

• Wings: One piece pre-covered, with plywood wing joiner

• Covering: Top Flite MonoKote

• Radio Compartment: Plywood reinforced, easily accessible under wing battery compartment located between cowl and canopy under magnetically secured hatch cover

• Cowling: Painted fiberglass

• Canopy: Single, tinted

• Landing Gear: Pre-formed wire with 2.1" (54mm) foam main wheels

• Tail gear: 2mm diameter wire with 1" (25.4mm) foam tailwheel

• Wheel Pants: Painted fiberglass

• Aileron Control: Single servo, full strip ailerons offer basic aerobatic potential for loops, rolls, spins and more

• Hardware: Included

• Building Time: Ready to fly in 5-6 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase. This warranty does not cover any component parts damaged by use or modification.

Specifications

• Wingspan: 48" (1220mm)

• Wing Area: 383 sq in (24.7 sq dm)

• Weight: 2.7 - 3 lb (1250 - 1360 g)

• Wing Loading: 17 - 18 oz/sq ft (52 - 55 g/sq dm)

• Length: 39" (990mm)

• Airfoil: Semi-Symmetrical

• Center of Gravity: 2¾" (70mm) Back from the wing's leading edge at the fuselage sides.

• Incidence: Stabilizer: 0°

• Main Wing: 1°

• Thrust Angle: Down 3°; Right 2°

• Control Throws- Low Rate High Rate

• Ailerons: Up & Down 1/4" (6mm) 16° 3/8" (10mm) 25°

• Elevator: Up & Down 3/8" (10mm) 9° 1/2" (13mm) 12°

• Rudder: Right & Left 3/4" (19mm) 13° 1" (25mm) 18°

Package Contents

• Pre-built and covered wing, fuselage and tail, pushrods, prebent wire main landing gear, 2" main wheels, 1" tail wheel, 2" (51mm) red spinner, fiberglass cowl and wheel pants, tinted canopy, decals, hardware package and photo-illustrated instructions

Requirements

• Radio: 4 channel with micro receiver

• Servos: 3 micro

• Motor: Brushless outrunner type

• ESC: 45A for brushless motors

• Battery: 11.1V LiPo, 3200 - 3700mAh (GPMP0727)

• Battery Charger: LiPo compatible

• Cell Balancer: For battery listed above

• Building and field equipment

Comments

• Following are the Top Flite MonoKote colors used to cover this model and order numbers for 6 foot rolls;

• Missile Red TOPQ0201

• Jet White TOPQ0204

• Black TOPQ0208