Great Planes Reactor 3D E-Performance Series ARF GPMA1540

This is the electric powered, almost ready to fly Great Planes Reactor 3D EP Performance Series Sport Airplane. Good third or fourth model for 3D aerobatic pilots 14 year of age and older.

Features

• Great Planes Reactor 3D E-Performance Series ARF GPMA1540

• Construction: All laser cut wood, built-up airframe with oversized control surfaces

• Wings: One-piece

• Cowl: Painted fiberglass with magnetic latch on underside that releases quickly and eliminates the need for screws resulting in sleeker appearance Wheel Pants: Plastic

• Landing Gear: Pre-formed aluminum .08" (2mm) thick

• Wheels: Two 1¾" (45mm) diameter, foam

• Battery Hatch: Magnetically latched, concealed on bottom of fuselage to maintain sleek appearance and ease battery changes

• Hardware: Complete, purpose designed for E-Performance aircraft

• Canopy: Clear

• Spinner: Red plastic 1¾" (45mm) diameter kit free from defects in both materials and workmanship at the date of purchase.

Specifications

• Wingspan: 41.5" (1055mm)

• Wing Area: 384 sq in (24.8 dm2)

• Weight: 24 - 27oz (680 - 765g)

• Wing Loading: 9 - 10.1 oz/sq ft (27 - 31 g/sq dm)

• Length: 42 in (1065mm)

• Airfoil: Fully symmetrical, mid-wing placement

• CG (center of gravity): 3-3/8" (86mm) back from the wing's leading edge at the fuselage sides

• Control Throws:

• High Rate Low Rate 3D Rate

• Elevator Up & Down: 7/8" (22mm) 9/16" (14mm) 2" (51mm)

• Rudder Right & Left: 2-3/8" (60mm) 1-3/16" (30mm) 3½" (89mm)

• Ailerons: Up & Down: 1-3/8" (35mm) ¾" (19mm) 2-5/8" (67mm)

Contents

• Great Planes Reactor 3D EP Sport ARF, fiberglass cowl, plastic wheel pants, illustrated instruction manual, decals, clear canopy spinner and all hardware

Requirements

• Radio: 4+-ch with micro receiver

• Servos: 4 micro (high torque strongly recommended)

• Two 6" (152mm) Extensions: HCAM2000

• Two 20" (500mm) Extensions: HCAM2200

• Y-Harness: For aileron servos HCAM2500

• Propeller: 10x4.5 Slo-Flyer, GPMQ6660

• Motor: Outrunner Brushless

• ESC: At least 25A Brushless motor compatible

• Battery: 11.1V 910-2100mAh LiPo pack

• The ElectriFly Park Flyer E-Performance Power System (GPMG4920) includes the following required components in one package

• Silver Series 35A Brushless Electronic Speed Control

• 35-30-1250kV Brushless Outrunner Electric Motor

• LiPo 2100mAh 11.1V 20C Battery Pack w/Balance Connector

• Charger: LiPo compatible, GPMM3010

Comments

• N/A