Great Planes Pluma 3D Indoor/Outdoor EP ARF

Great Planes Pluma 3D Indoor/Outdoor EP ARF GPMA1130

This is the electric powered, radio controlled, almost ready to fly ElectriFly by Great Planes Pluma 3D Biplane. For Intermediate Modeler/Pilots. Can be flown indoors or outdoors.

Features

Great Planes Pluma 3D Indoor/Outdoor EP ARF GPMA1130
Construction: Lightweight 0.12" (3mm) extruded polystyrene Pro-Formance foam-an ElectriFly exclusive, tabbed and interlocking for fast assembly and correct alignment, pre-applied graphics are lighter weight than paint all flying surfaces (except rudder) pre-hinged with genuine 3M Blenderm tape which is durable and feather light
Wings: Both sections with ailerons, speed brakes install between aileron link rods if desired
Aileron Control: Single servo
Landing Gear: Carbon rod with factory bent wire ends
Hardware: Carbon fiber and laser cut
Building Time: Ready to fly in about one hour
Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

Specifications

Wingspan: 32.5" (830mm)
Wing Area: 518 sq in (33.4 sq dm)
Weight: 8.4 - 9.5oz (240 - 270g)
Wing Loading: 2.3 -2.6oz/sq ft (7.2 - 8.1g/sq dm)
Length: 38" (955mm)
Center of Gravity:
Indoor Flying, 2-5/8" (67mm) from the leading edge of upper wing
Outdoor Flying, 2-1/2" (63mm) from the leading edge of upper wing
Total C.G. range is from 1-3/4" (44mm) forward to 3-5/16" (85mm) aft. Do not fly outside of this range
Control Throws-
Low Rate High Rate 3D Rate
Elevator: 1" (25mm) 17° 1-3/8" (35mm) 26° 2-1/8" (55mm) 46°
Rudder: 1-9/16" (40mm) 19° 2-3/4" (70mm) 36° 3-7/8" (100mm) 56°
Ailerons: 1-9/16" (40mm) 27° 2-3/8" (60mm) 43° 2-7/8" (75mm) 58°