Great Planes 1/4 Scale Extra 300S Wagstaff ARF GPMA1305

This is a Radio Controlled, Glow Powered, Almost Ready-to-Fly, Great Planes Patty Wagstaff 1/4 Scale Airplane. For Intermediate to Advanced Modeler/Fliers. Patty Wagstaff is a Highly respected Ambassador in the field of Women's Aviation. She is a World Champion Aerobatic pilot who Dazzles crowds world-wide with her Airshow Performances.

 Features

• Great Planes 1/4 Scale Extra 300S Wagstaff ARF GPMA1305

• Construction: All balsa and plywood

• Wings: Plug-in wings and stabilizer, w/ durable aluminum tube mounts attach the wings and stabilizers quickly and securely to the fuselage.

• Fully Airfoiled Surfaces including fin and rudder, for smooth flying at practically any altitude.

• Increased surface deflection for performing wildly courageous maneuvers.

• Covering: Factory applied MonoKote covering, in Patty's familiar Red,

• White and Sapphire Blue with her Sponsor decals and distinctive checkerboard patterned cowl. If needed for repair,use: TOPQ0201 - Missile Red

• TOPQ0204 - Jet White

• TOPQ0226 - Sapphire Blue

• TOPQ0404 - Metallic Gold

• Cowling: Pre-painted Checkerboard fiberglass

• Wheel Pants: Pre-painted fiberglass

• Canopy: Tinted single

• Landing Gear: Pre-formed painted aluminum

• Dual Aileron Servos:

• Building Time: Ready to fly in only 15 hours

• Warranty: 90 Day warranty on materials

 Specifications

• Wingspan: 78" (1981mm)

• Wing Area: 1157sq in (74.6dm2)

• Weight: 14-16lb (6.35-7.26kg)

• Wing Loading: 31oz/sq ft (94.6 g/dm2)

• Length: 72.5" (1841.5mm)

• Airfoil: Fully-Symmetrical Low-Wing

• Center of Gravity: 3-13/16" (97mm) Back from the wing tip

• Control Throws- Low Rate High Rate

• Ailerons: Up & Down 1¾" (45mm) 1¾" (45mm)

• Elevator: Up & Down 3¼" (83mm) 3¼" (83mm)

• Rudder: Right & Left 6½" (165mm) 6½" (165mm)

 Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, White Dural style 2" main landing gear, 1/8 " tailwheel wire, 4" main wheels, 1" tailwheel, nylon adjustable engine mount, 24oz fuel tank, 4" aluminum spinner, wood servo trays and wing joiners, hardware package and photo-illustrated instructions.

 Requirements

• Engine: 1.6-2.1 ci (26-35cc)(2-stroke) 2.0-3.0 ci (33-50cc)(4-stroke) 2.5-3.8 ci (41-65cc)(Gas)

• Muffler: Sports-Style (Engine mounts in an upright position) -or- Pitts-Style (Engine mounts on it side)

• Radio: 4-8 Channel (8 channel radio for computer radio/gas engine)

• Servos: 2-Standard for gas engine, or 1-Standard for glow engine 5-6 High Torque servos suggested for control Surfaces.

• If using Non-computer Radio: Four 12" Servo Extensions (HCAM2100) Two Y-Harnesses (HCAM2500) One Reversing Y-Harness (FUTM4150)

• If using Computer Radio: Three 12" Servo Extensions (HCAM2100) Four 24" Servo Extensions (HCAM2200) Four 6" Servo Extensions (HCAM2000)

• Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.

 Comments

• Pilot figure shown is not included. (DAVQ6240)for replacement spinner

• The fuel tank stopper included is for use with gas or glow fuel.

• If replacement Fuel Tank is needed you can use DUBQ0224 or SULQ1444.
  ?