DuraTrax IntelliPeak ICE DC Competition Charger DTXP4170

This is the DuraTrax Ice Battery Charger, Discharger and Cycler. * Five-Year Warranty

 Features

• DuraTrax IntelliPeak ICE DC Competition Charger DTXP4170

• Handles 1-10 NiCd or NiMH cells, and 1-4 Lithium Ion (Li-Ion) or Lithium Polymer (LiPo) cells

• Wide adjustable current ranges for Fast Charge (.1A-8A) and Discharge (.1A-10A) are ideal for electric cars, trucks and boats

• Four Charge modes: Linear, Reflex, Impulse, and 4-step* * The optional battery temperature monitor is required for 4-step

• Charge feature (DTXP4171)

• "Constant Current/Constant Voltage" Charge method for Li-Ion/LiPo batteries

• Reverse Polarity Protection

• Peak Detection with adjustable sensitivity for NiCd & NiMH batteries

• 0-500mA adjustable TRICKLE Charge current for NiCd and NiMH

• .8V-1.1V adjustable Discharge cut-off voltage for NiCd and NiMH

• 2.5V-3.7V adjustable Discharge cut-off voltage for Li-Ion/LiPo

• Performs 1-10 cycles (NiCd and NiMH only)-retrieves data for 10 full cycles

• Stores info for up to 10 batteries in memory by custom names for easy recall and charger set-up

• LCD screen shows 8 lines of data and 21 characters per line

• 1-8V adjustable output, time adjustable from 1-120 minutes and 10A Constant Current (30A surge) for motor break-in

• Also breaks-in electric motors and operates commutator lathes

 Specifications

• Input Voltage: 11-15V DC

• Battery Types, # of cells:

• 1-10 Nickel Cadmium cell (1.2-12V)

• 1-10 Nickel Metal Hydride cells (1.2-12V)

• 1-4 Lithium Ion or Lithium Polymer cells (3.6-14.8V)

• Battery Capacity Range: 100-9900mAh

• Fast Charge Current: .1-8A Linear, Reflex, Impulse and 4-step

• Fast Charge Termination: Peak Detection for NiCd and NiMH

• "Constant Current/Constant Voltage" for Li-Ion/LiPo, optional thermal cutoff for all battery types

• Peak Sensitivity: 0-25mV adjustable

• TRICKLE Charge Current: 0-500mA (n/a for Li-Ion/LiPo)

• Discharge Current: .1-10A adjustable

• Discharge Cut-Off Voltage: .8-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-Ion/LiPo

• Temperature Cut-Off Range: 50-132°F

• Cycle Count: one to ten (n/a for Li-Ion/LiPo)

• Cycle Cooloff Delay: 1-30 minutes, adjustable

• Battery Memories: 10

• Display Type: 8x21 LCD (168 characters max)

• Graphical Displays: Graphs Charge and Discharge Voltage curves

• Output Connectors: Banana jacks

• Motor Break-in: 1-8V selectable, 1-120 minutes, 10A constant

• Case Size: 5.5" x 1.8" x 5.9" (140x45x150mm)

• Weight: 21oz (605g)

 Contents

• One DuraTrax IntelliPeak ICE charger w/ banana jacks on output lead, alligator clip charge leads, Tamiya style charge lead, input lead with pre-installed banana plugs, large alligator clips, and instruction manual

 Requirements

• 12V DC power from a Power Supply or automotive battery or Hobbico 12V Power Supply (HCAP0250) or Rivergate 15A DC Bulldog Power Supply (RHCP2015)

• To achieve ICE's absolute maximum output power capabilities the DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions).

• Charge Leads depending on type of battery;

• DTXC2220 Charge Lead Banana to Standard

• DTXC2221 Charge Lead Banana to DNS Male

• DTXC2222 Charge Lead Banana to Traxxas

• DTXC2223 Charge Lead Banana to Mini Plug

• HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP

• HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY

• HCAP0105 JR Tx/Rx Charge Leads

• HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads

• GPMM3149 Charge Lead Banana/Deans Micro